Oam-Period - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

oam-period

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1644
oam-period (disable | seconds);
[edit interfaces interface-name atm-options vpi vpi-identifier],
[edit interfaces interface-name unit logical-unit-number],
[edit interfaces interface-name unit logical-unit-number family family address address
multipoint-destination address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family family address address multipoint-destination address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
For ATM encapsulation only, configure the OAM F5 loopback cell period. Not supported
on ATM-over-SHDSL interfaces.
For ATM2 IQ PICs only, configure the OAM F4 loopback cell period at the
interface-name atm-options vpi vpi-identifier]
If you omit this statement, OAM F5 loopback cells are not initiated, but the interface still
responds if it receives OAM F5 loopback cells.
disable —Disable the OAM loopback cell transmit feature.
—OAM loopback cell period.
seconds
Range: 1 through 900 seconds
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Defining the ATM OAM F5 Loopback Cell Period on page 187
hierarchy level.
Copyright © 2017, Juniper Networks, Inc.
[edit interfaces