Juniper ACX1000 Configuration Manual page 1876

ACX Series Universal Access Router Configuration Guide
Table 114: show bgp neighbor Output Fields (continued)
Field Name Field Description
Number of BGP packets that are queued to be transmitted to a particular neighbor for a particular
Output queue
routing table. Output queue
It also specifies the routing table name and the NLRI that the table was advertised through, in the
format
NOTE:
output level.
Configured tracing of BGP protocol packets and operations.
Trace options
Name of the file to receive the output of the tracing operation.
Trace file
(
Filter Updates recv orf
NOTE:
resends or clears the outbound route filtering prefix list.
(
Immediate orf
indicates that the BGP peer should readvertise the updated routes.
NOTE:
resends or clears the outbound route filtering prefix list.
(
Filter orf
Received filter entries ( orf
seq ( orf
filter prefix entries.
prefix ( orf
minlength ( orf
maxlength ( orf
(
match orf
Sample Output
show bgp neighbor
1818
is for unicast NLRIs, and queue
0
(routing table name, NLRI)
The output queue of routing tables that are not advertised, will only show up at
option only) Number of outbound-route filters received for each configured address family.
The counter is cumulative. For example, the counter is increased after the remote peer either
option only) Number of route updates received with the immediate flag set. The immediate flag
The counter is cumulative. For example, the counter is increased after the remote peer either
option only) Type of prefix filter received:
option only) List of received filters displayed.
option only) Numerical order assigned to this prefix entry among all the received outbound route
option only) Address for the prefix entry that matches the filter.
option only) Minimum prefix length, in bits, required to match this prefix.
option only) Maximum prefix length, in bits, required to match this prefix.
option only) For this prefix match, whether to
user@host > show bgp neighbor
For M Series, MX Series, and T Series routers running Junos OS Release 16.1 or later, the
output includes the BGP group the peer belongs to, the routing instance
show bgp neighbor
(if any) that the peer is configured in, and the routing instance that the peer is using for
the forwarding context (if applicable). An example follows.
1
.
or
prefix-based extended-community
or
permit deny
is for multicast NLRIs.
extensive
.
route updates.
Copyright © 2017, Juniper Networks, Inc.