Ipv4-Dscp; Ip-Swap (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

ipv4-dscp

Syntax
Hierarchy Level
Description
Options
Required Privilege
Level
Related
Documentation

ip-swap (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
ipv4-dscp number
[edit protocols ptp]
Specify the value used as the DiffServ code point (DSCP) value for all Precision Time
Protocol (PTP) IPv4 packets originated by the router.
number —DiffServ code point (DSCP) value for all PTP IPv4 packets originated by the
router.
Range: 0 through 63
Default: 56
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
Precision Time Protocol Overview
ip-swap;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Statement introduced in Junos OS Release 14.2 for MX Series routers.
Swaps source and destination IPv4 addresses. This statement is applicable only for
family .
bridge
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC2544-Based Benchmarking Tests Overview
Configuring an RFC 2544-Based Benchmarking Test
rfc2544-benchmarking on page 1698
Chapter 41: Configuration Statements
test-name]
1581