Alarm (Chassis) - Juniper ACX1000 Configuration Manual

alarm (chassis)

Syntax
Hierarchy Level
Release Information
Description
Options
Copyright © 2017, Juniper Networks, Inc.
alarm {
interface-type {
alarm-name (ignore |red | yellow);
}
}
relay
input {
port port-number {
mode (close | open);
trigger (ignore | red | yellow);
}
}
output{
port port-number {
input-relay input-relay;
mode (close | open);
temperature;
}
}
[edit chassis],
Statement introduced in Junos OS Release 12.3 for the ACX Series Routers.
Configure the chassis alarms and whether they trigger a red or yellow alarm, or whether
they are ignored. Red alarm conditions light the
craft interface or the switch's LCD screen and trigger an audible alarm if one is connected
to the contact on the craft interface or LCD screen. Yellow alarm conditions light the
LED on either the router's craft interface or the switch's LCD screen and
YELLOW ALARM
trigger an audible alarm if one is connected to the craft interface or LCD screen.
To configure more than one alarm, include multiple
The remaining statements are explained separately. See
—Alarm condition. For a list of conditions, see System-Wide Alarms and Alarms
alarm-name
for Each Interface Type.
—The specified alarm condition does not set off any alarm.
ignore
interface-type —Type of interface on which you are configuring the alarm:
, or .
t1 e1
—The specified alarm condition sets off a red alarm.
red
—The specified alarm condition sets off a yellow alarm.
yellow
Chapter 41: Configuration Statements
RED ALARM LED on either the router's
alarm-name lines.
.
CLI Explorer
atm , ethernet ,
1425