Max-Delay-Response-Interval - Juniper ACX1000 Configuration Manual

max-delay-response-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
max-delay-response-interval max-delay-response-interval;
[edit protocols ptp master]
Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Configure the maximum log mean interval between delay-response messages. This is a
2
log value, which means that the maximum delay-response rate is 128 messages per
second.
max-delay-response-interval—Maximum acceptable interval between delay-response
messages.
Range: -7 to 4
Default: 4
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
IEEE 1588v2 PTP Boundary Clock Overview on page 234
Configuring Precision Time Protocol Clocking on page 243
Configuring a PTP Master Boundary Clock on page 244
Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
Example: Configuring a PTP Boundary Clock on page 248
Chapter 41: Configuration Statements
1603