Juniper ACX1000 Configuration Manual page 1758

ACX Series Universal Access Router Configuration Guide
Default
Options
Required Privilege
Level
Related
Documentation
1700
NOTE: The IPv4 multicast routing table (
table ( ) are not supported for this statement.
inet6.1
If you do not specify a routing table name with the
uses the default routing tables, which are
multicast cache.
—Name of the routing table, in the following format:
routing-table-name
[ ].
protocol .identifier
In a routing instance, the routing table name must include the routing instance name.
For example, if the routing instance name is
.
link0.inet6.0
is the protocol family. It can be
protocol
for the ISO protocol family, or
iso
is a positive integer that specifies the instance of the routing table.
identifier
Default:
inet.0
The remaining statements are explained separately. See
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Creating Routing Tables
passive on page 1654
inet.1 ) and the IPv6 multicast routing
routing-table-name
for unicast routes and
inet.0
, the routing table name might be
link0
for the IPv6 family,
inet6
for an ISO routing instance.
instance-name.iso.0
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.
option, the software
for the
inet.1
for the IPv4 family,
inet
.