Source-Ipv4-Address (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

source-ipv4-address (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1724
source-ipv4-address address;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Specify the source IPv4 address to be used in generated test frames. This parameter is
optional for both circuit cross-connect (CCC) and,
do not configure the source IPv4 address for an
interface is used to transmit the test frames.
—Valid IPv4 address.
address
Default: If you do not configure the source IPv4 address for a CCC family and bridge
family, the default value of 192.168.1.10 is used.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
test-name]
inet , and also for bridge family. If you
family, the source address of the
inet
Copyright © 2017, Juniper Networks, Inc.