Interfaces Bits (Chassis Synchronization) - Juniper ACX1000 Configuration Manual

interfaces bits (Chassis Synchronization)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
interfaces bits {
signal-type (2048KHZ | e1 | t1) {
e1-options {
framing (g704 | g704-no-cro4);
}
t1-options {
framing (esf | sf);
}
}
}
[edit chassis synchronization
Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Configure the parameters of the building-integrated timing supply (BITS) interface.
NOTE: is not supported on the ACX1000 router.
bits
The remaining statements are explained separately. See
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
External Clock Synchronization Overview for ACX Series Routers on page 226
Configuring External Clock Synchronization for ACX Series Routers on page 228
Synchronous Ethernet Overview
show chassis synchronization on page 2386
]
Chapter 41: Configuration Statements
.
CLI Explorer
1579