Traceoptions (Protocols Pcep) - Juniper ACX1000 Configuration Manual

traceoptions (Protocols PCEP)

Syntax
Hierarchy Level
Description
Options
Copyright © 2017, Juniper Networks, Inc.
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag;
no-remote-trace;
}
[edit protocols pcep]
Configure the Path Computation Element Protocol (PCEP) tracing options.
—Name of the file to receive the output of the tracing operation. All files are
filename
placed in the directory
—(Optional) Maximum number of trace files. When a trace file named
files number
trace-file reaches its maximum size, it is renamed trace-file.0, then trace-file.1, and
so on, until the maximum number of trace files is reached. Then the oldest trace file
is overwritten.
Range: 2 through 1000 files
Default: 2 files. If you specify a maximum number of files, you must also include the
size statement to specify the maximum file size.
—Area of path computation client process (pccd) to enable debugging output.
flag
PCEP Tracing Flags
—Trace all areas of PCCD code
all
pccd-config —All configuration parsing operations
—PCCD core operations
pccd-core
pccd-functions —PCCD function entries and outs
—PCCD main module
pccd-main
pccd-rpd —PCCD communication with RPD
—PCCD user interface handling
pccd-ui
no-remote-trace —(Optional) Disable remote tracing options.
—(Optional) Allow only certain users to read the log file.
no-world-readable
—(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes (MB),
size size
or gigabytes (GB). When a trace file named trace-file reaches this size, it is renamed
trace-file.0. When the trace-file again reaches this size, trace-file.0 is renamed
trace-file.1 and trace-file is renamed trace-file.0. This renaming scheme continues
until the maximum number of trace files is reached. Then the oldest trace file is
overwritten.
.
/var/log
Chapter 41: Configuration Statements
1757