Juniper ACX1000 Configuration Manual page 1890

ACX Series Universal Access Router Configuration Guide
Output Fields
Table 116: show bgp summary Output Fields
Field Name Field Description
Number of BGP groups.
Groups
Number of BGP peers.
Peers
Number of down BGP peers.
Down peers
Name of routing table.
Table
Total number of paths.
Tot Paths
Number of active routes.
Act Paths
Number of routes currently inactive because of damping or other reasons. These routes do not appear
Suppressed
in the forwarding table and are not exported by routing protocols.
History Number of withdrawn routes stored locally to keep track of damping history.
Damp State Number of routes with a figure of merit greater than zero, but still active because the value has not
reached the threshold at which suppression occurs.
Routes in process by BGP import policy.
Pending
Address of each BGP peer. Each peer has one line of output.
Peer
Peer's AS number.
AS
Number of packets received from the peer.
InPkt
Number of packets sent to the peer.
OutPkt
Number of BGP packets that are queued to be transmitted to a particular neighbor. It normally is
OutQ
because the queue usually is emptied quickly.
Number of times the BGP session has gone down and then come back up.
Flaps
Last time since the neighbor transitioned to or from the established state.
Last Up/Down
1832
show bgp summary group on page 1835
show bgp summary (BGP Graceful Restart or Long-Lived Graceful Restart) on page 1836
Table 116 on page 1832 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
show bgp summary command.
Copyright © 2017, Juniper Networks, Inc.
0