Juniper ACX1000 Configuration Manual page 1739

Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
}
guard-interval number;
node-id mac-address;
restore-interval number;
ring-protection-link-owner;
west-interface {
node-id mac-address;
control-channel channel-name {
vlan number;
interface name interface-name
}
interface-none
ring-protection-link-end;
}
control-channel channel-name {
vlan number;
interface name interface-name
}
}
}
guard-interval number;
restore-interval number;
traceoptions {
file filename <no-stamp> <world-readable | no-world-readable> <replace> <size size>;
flag flag;
}
}
[edit protocols]
Statement introduced in Junos OS Release 9.4.
Statement introduced in Junos OS Release 12.1 for EX Series switches.
Configure Ethernet ring protection switching.
The statements are explained separately. All statements apply to MX Series routers. EX
Series switches do not assign
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Ethernet Ring Protection Switching Overview on page 111
Ethernet Ring Protection Using Ring Instances for Load Balancing
Example: Configuring Load Balancing Within Ethernet Ring Protection for MX Series
Routers
Example: Configuring Ethernet Ring Protection Switching on EX Series Switches
Example: Configuring Ethernet Ring Protection Switching on QFX Series and EX Series
Switches Supporting ELS
Configuring Ethernet Ring Protection Switching (CLI Procedure)
node-id and use control-vlan
Chapter 41: Configuration Statements
instead of control-channel .
1681