Juniper ACX1000 Configuration Manual page 1027

Table 60: Standard MIBs supported by Junos OS (continued)
Standard MIB
RFC 1195, Use of OSI IS-IS for Routing in
TCP/IP and Dual Environments
RFC 1212, Concise MIB Definitions
RFC 1213, Management Information Base
for Network Management of
TCP/IP-Based Internets: MIB-II
RFC 1215, A Convention for Defining Traps
for use with the SNMP
RFC 1406, Definitions of Managed Objects
for the DS1 and E1 Interface Types
RFC 1407, Definitions of Managed Objects
for the DS3/E3 Interface Type
Copyright © 2017, Juniper Networks, Inc.
Exceptions
Supported tables and objects:
isisSystem
isisMANAreaAddr
isisAreaAddr
isisSysProtSupp
isisSummAddr
isisCirc
isisCircLevel
isisPacketCount
isisISAdj
isisISAdjAreaAddr
isisAdjIPAddr
isisISAdjProtSupp
isisRa
isisIPRA
No exceptions
Junos OS supports the following areas:
MIB II and its SNMP version 2
derivatives, including:
Statistics counters
IP, except for
ipRouteTable
has been replaced by
(RFC 2096, IP
ipCidrRouteTable
Forwarding Table MIB)
SNMP management
Interface management
SNMPv1 , requests, and
Get GetNext
version 2 request
GetBulk
Junos OS-specific secured access list
Master configuration keywords
Reconfigurations upon SIGHUP
Junos OS supports only MIB II SNMP
version 1 traps and version 2 notifications.
Junos OS supports T1 MIB.
Junos OS supports T3 MIB.
Chapter 29: Understanding Network Management
Platforms
All platforms
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
, which
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
ACX Series, M Series, SRX Series, and T
Series
M Series and T Series
969