Output (Chassis Alarm Relay); Outer-Tag-Protocol-Id (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

output (Chassis Alarm Relay)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

outer-tag-protocol-id (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1646
output{
port port-number {
input-relay input-relay;
mode (close | open);
temperature;
}
}
[edit chassis alarm relay]
Statement introduced in Junos OS Release 12.3.
Configure output relay alarms.
The remaining statements are explained separately. See
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
User-Defined Alarm Relay Overview on page 158
show chassis craft-interface on page 1865
show chassis alarms on page 1845
outer-tag-protocol-id;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
TPID to be used in the outer VLAN tag. Supported values are 0x8100, 0x88a8, 0x9100,
0x9200
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
.
CLI Explorer
test-name]
Copyright © 2017, Juniper Networks, Inc.