Direction (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

direction (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
direction (egress | ingress);
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Specify the direction of the interface on which the test must be run. RFC 2544 tests are
supported only in the egress direction.
—Causes the test to be run in the egress direction of the interface (traffic send
egress
from user-to-network interface (UNI) towards network-to-network interface (NNI)).
ingress —Causes the test to be run in the ingress direction of the interface (traffic sent on
user-to-network interface (UNI)). You cannot configure this option for a bridge family.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
Chapter 41: Configuration Statements
test-name]
1485