Configuring Fixed Classification On An Atm Ima Pseudowire - Juniper ACX1000 Configuration Manual

Related
Documentation

Configuring Fixed Classification on an ATM IMA Pseudowire

Copyright © 2017, Juniper Networks, Inc.
forwarding-class class-name
interface-name unit logical-unit-number
Configuring Fixed Classification on an ATM IMA Pseudowire on page 897
Configuring Policing on an ATM IMA Pseudowire on page 912
Configuring Shaping on an ATM IMA Pseudowire on page 901
You configure fixed classification on the ATM IMA pseudowire logical interface (unit) by
specifying a forwarding class, which is applied to all packets received by the logical
interface. To complete this configuration, you can define a forwarding class at the [
class-of-service forwarding-classes
class, the default class is used.
The following steps require you to navigate various levels in the configuration hierarchy.
For information about navigating the CLI, see Using the CLI Editor in Configuration Mode
in the CLI User Guide.
NOTE: CoS fixed classification on an ATM IMA pseudowire is not applicable
on ACX5048 and ACX5096 routers.
To configure CoS fixed classification on an ATM IMA pseudowire:
Define the ATM IMA pseudowire. For information about defining the ATM IMA
1.
pseudowire, see "Configuring Inverse Multiplexing for ATM (IMA)" on page
In configuration mode, go to the
2.
[edit]
user@host# edit class-of-service
Define the forwarding class to apply to the input logical interface, if the default
3.
forwarding class is not used:
[edit class-of-service]
user@host# set forwarding-classes class class-name queue-num queue-num
Specify the ATM IMA interface on which to include the forwarding class:
4.
[edit class-of-service]
user@host# edit interfaces at-fpc/pic/port
Configure the logical unit:
5.
[edit class-of-service interfaces at-fpc/pic/port]
user@host# edit unit logical-unit-number
statement at the [
edit class-of-service interface
hierarchy level.
] hierarchy level. If you do not define a forwarding
[edit class-of-service]
Chapter 27: Configuring Class of Service
185.
hierarchy level:
edit
897