Juniper ACX1000 Configuration Manual page 1851

Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Sample Output
clear dhcp relay binding
clear dhcp relay binding all
clear dhcp relay binding dual-stack all
Copyright © 2017, Juniper Networks, Inc.
view
Clearing DHCP Bindings for Subscriber Access
show dhcp relay binding on page 2455
clear dhcp relay binding on page 1793
clear dhcp relay binding all on page 1793
clear dhcp relay binding dual-stack all on page 1793
clear dhcp relay binding interface on page 1794
clear dhcp relay binding <interfaces-vlan> on page 1794
clear dhcp relay binding <interfaces-wildcard> on page 1794
See show dhcp relay binding
The following sample output displays the address bindings in the DHCP client table
before and after the
clear dhcp relay binding
user@host> show dhcp relay binding
IP address Hardware address
198.51.100.32 00:00:5e:00:53:01
192.168.14.8 00:00:5e:00:53:02
user@host> clear dhcp relay binding 198.51.100.32
user@host> show dhcp relay binding
IP address Hardware address
192.168.14.8 00:00:5e:00:53:02
The following command clears all DHCP relay agent bindings:
user@host> clear dhcp relay binding all
The following command clears all DHCP relay agent bindings for all DHCPv4 clients and
the associated DHCPv6 bindings in the single-session DHCP dual stack. DHCPv6 clients
created in a DHCPv6-only stack are not affected.
user@host> clear dhcp relay binding dual-stack all
for an explanation of output fields.
command is issued.
Type Lease expires at
active 2007-02-08 16:41:17 EST
active 2007-02-10 10:01:06 EST
Type Lease expires at
active 2007-02-10 10:01:06 EST
Chapter 42: Operational Commands
1793