Juniper ACX1000 Configuration Manual page 1926

ACX Series Universal Access Router Configuration Guide
Table 120: show chassis craft-interface Output Fields (continued)
Field Name Field Description
(MX2010, MX2020, and MX2008 Routers) Status of the Front Panel Flexible PIC Concentrator (FPC)
Front Panel FPC LEDs
LEDs. A dot (
MX2008 routers, there are 10 (0-9) FPCs LEDs. On MX2020 routers, there are 20 (0-9 and 10-19)
FPCs LEDs.
CB LEDs Status of the Control Board (CB) LEDs. A dot (
the LED is lit.
(MX2010, MX2020, and MX2008 Routers) Status of the Power Supply (PS) LEDs. A dot (
PS LEDs
the LED is not lit. An asterisk (
9 (0-8) PS LEDs. On MX2020 routers, there are 18 (0-8 and 9-17) PS LEDs.
(MX104 Routers) Status of the Power Supply (PS). Green indicates that the power supply is functioning.
PS Status
Red indicates that the power supply is not functioning. A dot (
(
*
(MX2010, MX2020, and MX2008 Routers) Status of the Fan Tray LEDs. A dot (
FAN Tray LEDs
is not lit. An asterisk (
(MX2010, MX2020, and MX2008 Routers) Status of the Front Panel Switch Fabric Boards (SFB)
Front Panel SFB LEDs
LEDs. A dot (
(MX2010, MX2020, and MX2008 Routers) Information about the chassis such as the chassis number
Front Panel Chassis Info
and role. User can set the chassis number in multi-chassis configurations.
Status of the Miscellaneous Control Subsystem (MCS) and Switching and Forwarding Module (SFM)
MCS and SFM LEDs
LEDs. A dot (
nor an asterisk is displayed, there is no board in that slot.
SIB LEDs Status of the Switch Interface Board (SIB) LEDs. A dot (
indicates the LED is lit.
Status of the SONET Clock Generator (SCG) LEDs. A dot (
SCG LEDs
( *
Sample Output
show chassis craft-interface (M20 Router)
1868
) indicates the LED is not lit. An asterisk (
.
* ) indicates the LED is lit. On MX2010 and MX2008 routers, there are
) indicates the LED is lit.
* ) indicates the LED is lit.
) indicates the LED is not lit. An asterisk (
.
. ) indicates the LED is not lit. An asterisk (
) indicates the LED is lit.
user@host> show chassis craft-interface
Red alarm: LED off, relay off
Yellow alarm: LED on, relay on
Host OK LED: On
Host fail LED: Off
FPCs 0 1 2 3
-------------------
Green . * *.
Red ....
LCD screen:
+--------------------+
|host
) indicates the LED is lit. On MX2010 and
*
. ) indicates the LED is not lit. An asterisk (
) indicates the LED is not lit. An asterix
.
) indicates the LED is lit.
*
* ) indicates the LED is lit. When neither a dot
. ) indicates the LED is not lit. An asterisk (
) indicates the LED is not lit. An asterisk
.
|
* ) indicates
) indicates
.
) indicates the LED
.
Copyright © 2017, Juniper Networks, Inc.
* )