Clear Dhcp Relay Statistics - Juniper ACX1000 Configuration Manual

clear dhcp relay statistics

Syntax
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
clear dhcp relay statistics
<bulk-leasequery-connections>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Syntax for EX Series switches:
show dhcp relay statistics
<routing-instance routing-instance-name>
Command introduced in Junos OS Release 8.3.
Statement introduced in Junos OS Release 12.1 for EX Series switches.
Command introduced in Junos OS Release 12.1X48R3 for PTX Series Packet Transport
Routers.
bulk-leasequery-connections
Clear all Dynamic Host Configuration Protocol (DHCP) relay statistics.
bulk-leasequery-connections—(Optional) Clear bulk leasequery statistics.
logical-system logical-system-name—(On routers only) (Optional) Perform this operation
on the specified logical system. If you do not specify a logical system name, statistics
are cleared for the default logical system.
routing-instance routing-instance-name—(Optional) Perform this operation on the
specified routing instance. If you do not specify a routing instance name, statistics
are cleared for the default routing instance.
view
show dhcp relay statistics on page 2451
clear dhcp relay statistics on page 1790
Table 111 on page 1790 lists the output fields for the
option introduced in Junos OS Release 16.1.
clear dhcp relay statistics
Chapter 42: Operational Commands
command.
1789