Juniper ACX1000 Configuration Manual page 1898

ACX Series Universal Access Router Configuration Guide
Required Privilege
Level
List of Sample Output
Output Fields
1840
view
show bridge mac-table on page 1841
show bridge mac-table (with Layer 2 Services over GRE Interfaces) on page 1841
show bridge mac-table (with VXLAN enabled) on page 1842
show bridge mac-table age (for GE interface) on page 1842
show bridge mac-table age (for AE interface) on page 1842
show bridge mac-table count on page 1842
show bridge mac-table detail on page 1843
show bridge mac-table instance pbb-evpn on page 1843
show bridge mac-table on page 1843
Table 117 on page 1840 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 117: show bridge mac-table Output Fields
Field Name Field Description
Age Age of a single mac-address.
Routing instance Name of the routing instance.
Bridging domain Name of the bridging domain.
MAC address MAC address or addresses learned on a logical interface.
MAC flags Status of MAC address learning properties for each interface:
S
D
L
C
SE
NM
R
P
Logical interface Name of the logical interface.
MAC count Number of MAC addresses learned on the specific routing instance or
interface.
Learning interface Name of the logical interface on which the MAC address was learned.
Learning VLAN VLAN ID of the routing instance or bridge domain in which the MAC address
was learned.
VXLAN ID/VXLAN VXLAN Network Identifier (VNI).
—Static MAC address is configured.
—Dynamic MAC address is configured.
—Locally learned MAC address is configured.
—Control MAC address is configured.
—MAC accounting is enabled.
—Non-configured MAC.
—Remote PE MAC address is configured.
—MAC Pinned interface is configured
command.
show bridge mac-table
Copyright © 2017, Juniper Networks, Inc.