Default Ieee 802.1Ad Classifier - Juniper ACX1000 Configuration Manual

Default IEEE 802.1ad Classifier

Copyright © 2017, Juniper Networks, Inc.
Table 58 on page 957 shows the code point, forwarding class alias, and PLP that are
assigned to the IEEE 802.1ad bits when you apply the explicit default IEEE 802.1ad
classifier. The table is very similar to the IEEE 802.1p default table, but the loss priority is
determined by the drop eligibility indicator (DEI) bit. To apply the default table, include
the statement at the
default
ieee-802.1] hierarchy level:
[edit class-of-service interfaces interface-name classifiers ieee-802.1ad]
default;
Table 58: Default IEEE 802.1ad Classifier
IEEE 802.1ad Code Point
0000
0010
0100
0110
1000
1010
1100
1110
0001
0011
0101
0111
1001
1011
1101
1111
Chapter 28: Configuring Behavior Aggregate Classifiers
[edit class-of-service interfaces interface-name classifiers
Forwarding Class Alias
be
be1
ef
ef1
af11
af12
nc1
nc2
be-dei
be1-dei
ef-dei
ef1-dei
af11-dei
af12-dei
nc1-dei
nc2-dei
PLP
low
low
low
low
low
low
low
low
high
high
high
high
high
high
high
high
957