Framing - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

framing

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1532
framing (t1 | e1);
[edit chassis fpc slot-number pic pic-number],
Statement introduced in Junos OS Release 12.2 for ACX Series routers.
When you set the framing type, you set the emulation mode so that the built-in
channelized T1 and E1 interfaces can work in either T1 or E1 mode. This configuration is
at the PIC level, so all ports operate as either T1 interfaces or E1 interfaces. A mix of T1
and E1 interfaces is not supported. By default all the ports operate as T1 interfaces.
t1
e1 —Framing for E1 interfaces.
—Framing for T1 interfaces.
t1
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Setting the T1/E1 Emulation Mode on page 192
SAToP Emulation on T1 and E1 Interfaces Overview on page 110
Inverse Multiplexing for ATM (IMA) Overview on page 184
Copyright © 2017, Juniper Networks, Inc.