Juniper ACX1000 Configuration Manual page 1032

ACX Series Universal Access Router Configuration Guide
Table 60: Standard MIBs supported by Junos OS (continued)
Standard MIB
RFC 2819, Remote Network Monitoring
Management Information Base
RFC 2863, The Interfaces Group MIB
NOTE: RFC 2863 replaces RFC 2233.
However, Junos OS supports both RFC
2233 and RFC 2863.
RFC 2864, The Inverted Stack Table
Extension to the Interfaces Group MIB
RFC 2922, The Physical Topology
(PTOPO) MIB
RFC 2925, Definitions of Managed Objects
for Remote Ping, Traceroute, and Lookup
Operations
RFC 2932, IPv4 Multicast Routing MIB
974
Exceptions
Supported tables and objects:
(for Ethernet
etherStatsTable
interfaces only),
alarmTable
, and are
eventTable logTable
supported on all devices running Junos
OS.
and
historyControlTable
(except
etherHistoryTable
etherHistoryUtilization object) are
supported only on EX Series switches.
No exceptions
No exceptions
Supported objects:
ptopoConnDiscAlgorithm
ptopoConnAgentNetAddrType
ptopoConnAgentNetAddr
ptopoConnMultiMacSASeen
ptopoConnMultiNetSASeen
ptopoConnIsStatic
ptopoConnLastVerifyTime
ptopoConnRowStatus
Supported tables and objects:
pingCtlTable
pingResultsTable
pingProbeHistoryTable
pingMaxConcurrentRequests
traceRouteCtlTable
traceRouteResultsTable
traceRouteProbeHistoryTable
traceRouteHopsTable
No exceptions
Platforms
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
,
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
M Series, MX Series, PTX Series, SRX
Series, and T Series
EX Series and SRX Series
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
Copyright © 2017, Juniper Networks, Inc.