Juniper ACX1000 Configuration Manual page 1872

ACX Series Universal Access Router Configuration Guide
Table 114: show bgp neighbor Output Fields (continued)
Field Name Field Description
BGP neighbor does not support long-lived graceful restart (LLGR) restarter mode for any family.
Peer does not support
LLGR Restarter
functionality
(appears only if the
Authentication key
authentication keychain enabled.
change
(appears only if the
Authentication
algorithm algorithm enabled:
Names of configured address families for the VPN.
Address families
configured
BGP-Static Name of the bgp static policy that is configured on the peer.
Advertisement Policy
Local Address Address of the local routing device.
Remove-private options Options associated with the
Holdtime Hold time configured with the
keepalive messages are sent.
Flags related to labeled-unicast:
Flags for NLRI
inet-label-unicast
Information about labeled-unicast traffic statistics:
Traffic statistics
Time between sample periods for labeled-unicast traffic statistics, in seconds.
Traffic Statistics
Interval
Preference value configured with the
Preference
Time for which the route is available in Junos OS routing table before it is exported to BGP. This field
Outbound Timer
is displayed in the output only if the
Number of times the BGP session has gone down and then come back up.
Number of flaps
Router identifier of the peer.
Peer ID
Index number for the BGP peer group. The index number differentiates between groups when a single
Group index
BGP group is split because of different configuration options at the group and peer levels.
1814
authentication-keychain
authentication-algorithm
hmac or md5
remove-private
hold-time
—Collection of statistics for labeled-unicast traffic is enabled.
TrafficStatistics
—Options configured for collecting statistics about labeled-unicast traffic.
Options
—Name and location of statistics log files.
File
—Size of all the log files, in bytes.
size
files —Number of log files.
statement has been configured) Name of the
statement has been configured) Type of authentication
.
statement.
statement. The hold time is three times the interval at which
statement.
preference
parameter is configured to a non-zero value.
out-delay
Copyright © 2017, Juniper Networks, Inc.