Juniper ACX1000 Configuration Manual page 1490

ACX Series Universal Access Router Configuration Guide
Required Privilege
Level
Related
Documentation
1432
two octets) for
as-number
the aggregate route for
as-path —(Optional) AS path to include with the route. It can include a combination of
individual AS path numbers and AS sets. Enclose sets in brackets ( [ ] ). The first AS
number in the path represents the AS immediately adjacent to the local AS. Each
subsequent number represents an AS that is progressively farther from the local AS,
heading toward the origin of the path. You cannot specify a regular expression for
as-path . You must use a complete, valid AS path.
—(Optional) Attach the BGP
atomic-aggregate
aggregate route. This path attribute indicates that the local system selected a less
specific route instead of a more specific route.
origin egp —(Optional) BGP origin attribute that indicates that the path information
originated in another AS.
—(Optional) BGP origin attribute that indicates that the path information
origin igp
originated within the local AS.
—(Optional) BGP origin attribute that indicates that the path information
origin incomplete
was learned by some other means.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Summarizing Static Routes Through Route Aggregation
Using 4-Byte Autonomous System Numbers in BGP Networks Technology Overview
, followed by the IP address of the BGP system that formed
.
ip-address
atomic-aggregate
path attribute to the
Copyright © 2017, Juniper Networks, Inc.