Bits - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

bits

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1450
Configuring Layer 3 Tunnel Services Interfaces on an MX Series Router with a DPC
tunnel-services (Chassis) on page 1765
bits {
priority number;
quality-level (prc | prs |sec | smc | ssu-a | ssu-b | st2 | st3 | st3e | st4 | stu | tnc);
request request (force-switch | lockout);
}
[edit chassis synchronization
Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Configure the external BITS device connected to the router's T1 or E1 building-integrated
timing supply (BITS) interface, which upon configuration becomes a candidate for
selection as the clock source by the clock source selection algorithm.
NOTE: The bits
The remaining statements are explained separately. See
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
External Clock Synchronization Overview for ACX Series Routers on page 226
Configuring External Clock Synchronization for ACX Series Routers on page 228
Synchronous Ethernet Overview
show chassis synchronization on page 2386
source]
option is not supported on the ACX1000 router.
.
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.