Skip-Arp-Iteration (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

skip-arp-iteration (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
skip-arp-iteration;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Disable the Address Resolution Protocol (ARP) test iteration for IPv4 or inet services
during a benchmarking test. This parameter is valid only for an
iteration is a 3-second iteration that is run for all
are disregarded in the test result calculations. The ARP test iteration is performed by
sending test frames for 3 seconds to ensure that all devices on the path to destination
add ARP entries in the cache of the corresponding devices. This parameter is not
applicable for CCC and bridge families.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
Chapter 41: Configuration Statements
test-name]
inet family. An ARP test
tests. The results of this iteration
inet
1723