Juniper ACX1000 Configuration Manual page 1234

ACX Series Universal Access Router Configuration Guide
Table 91: jnxSoamLmCfgTable (continued)
Object
jnxSoamLmCfgEnabled
1176
Object ID Description
Specifies whether the Loss Measurement session is
JnxSoamLmCfgEntry
enabled.
4
The value 'true' indicates the Loss Measurement session
is enabled and SOAM PDUs are sent and/or
measurements are collected when the session is running
according to the scheduling objects (start time, stop time,
etc.).
The value 'false' indicates the Loss Measurement session
is disabled and SOAM PDUs are not sent and/or
measurements collected.
For a Loss Measurement session to be removed the row
is deleted in order to release internal resources.
This object can be written/modified after row creation
time.
If the LM session is enabled it resumes after
shutdown/restart. If the LM session is disabled the current
Measurement Interval is stopped, if it in process at the
time, and all the in process calculations for the partially
completed Measurement Interval are finalized.
This object does not affect whether the single-ended
Responder is enabled or not, which is enabled or disabled
by the jnxSoamPmMepLmSingleEndedResponder and
jnxSoamPmMepSlmSingleEndedResponder objects.
Copyright © 2017, Juniper Networks, Inc.