Source (Chassis Synchronization) - Juniper ACX1000 Configuration Manual

source (Chassis Synchronization)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
source {
(bits | gps) {
priority number;
quality-level (prc | prs |sec | smc | ssu-a | ssu-b | st2 | st3 | st3e | st4 | stu | tnc);
request request (force-switch | lockout);
}
interfaces interface-name {
priority number;
quality-level (prc | prs |sec | smc | ssu-a | ssu-b | st2 | st3 | st3e | st4 | stu | tnc);
request request (force-switch | lockout);
wait-to-restore minutes;
}
}
[edit chassis synchronization]
Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Configure a clock source used by the clock selection process.
The remaining statements are explained separately. See
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
External Clock Synchronization Overview for ACX Series Routers on page 226
Configuring External Clock Synchronization for ACX Series Routers on page 228
Synchronous Ethernet Overview
show chassis synchronization on page 2386
Chapter 41: Configuration Statements
.
CLI Explorer
1721