Port (Alarm Relay Output) - Juniper ACX1000 Configuration Manual

port (Alarm Relay Output)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
port port-number {
input-relay input-relay;
mode (close | open);
temperature;
}
[edit chassis alarm relay output
Statement introduced in Junos OS Release 12.3.
Configure the output relay alarm port.
The remaining statements are explained separately. See
—Output relay alarm port numbers are 0 through 3. However, only ports 0
port-number
and 1 are configurable. Output relay ports 2 and 3 are used to indicate system major
and minor alarms and are in normally open mode.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
User-Defined Alarm Relay Overview on page 158
show chassis craft-interface on page 1865
show chassis alarms on page 1845
Chapter 41: Configuration Statements
]
CLI Explorer
.
1669