Juniper ACX1000 Configuration Manual page 1568

ACX Series Universal Access Router Configuration Guide
Required Privilege
Level
Related
Documentation
1510
—Use Ethernet VLAN bridge encapsulation on Ethernet interfaces that have
vlan-bridge
IEEE 802.1Q tagging, flexible-ethernet-services, and bridging enabled and that must
accept packets carrying TPID 0x8100 or a user-defined TPID.
vlan-ccc —Use Ethernet virtual LAN (VLAN) encapsulation on CCC circuits. When you use
this encapsulation type, you can configure the
vlan-vci-ccc —Use ATM-to-Ethernet interworking encapsulation on CCC circuits. When
you use this encapsulation type, you can configure the
—Use Ethernet VLAN encapsulation on TCC circuits. When you use this
vlan-tcc
encapsulation type, you can configure the
—Use Ethernet VLAN encapsulation on VPLS circuits.
vlan-vpls
vxlan —Use VXLAN data plane encapsulation for EVPN.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Layer 2 Switching Cross-Connects Using CCC
Configuring the Encapsulation for Layer 2 Switching TCCs
Configuring Interface Encapsulation on Logical Interfaces
Configuring MPLS LSP Tunnel Cross-Connects Using CCC
Circuit and Translational Cross-Connects Overview
Identifying the Access Concentrator
Configuring ATM Interface Encapsulation
Configuring VLAN and Extended VLAN Encapsulation
Configuring ATM-to-Ethernet Interworking
Configuring Interface Encapsulation on PTX Series Packet Transport Routers
Configuring CCC Encapsulation for Layer 2 VPNs
Configuring TCC Encapsulation for Layer 2 VPNs and Layer 2 Circuits
Configuring ATM for Subscriber Access
Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
Configuring Policing on an ATM IMA Pseudowire on page 912
family only.
ccc
family only.
ccc
tcc family only.
Copyright © 2017, Juniper Networks, Inc.