Vpi (Define Virtual Path) - Juniper ACX1000 Configuration Manual

vpi (Define Virtual Path)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
vpi vpi-identifier {
maximum-vcs maximum-vcs;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (disable | seconds);
shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst
length);
queue-length number;
}
}
[edit interfaces at-fpc/pic/port atm-options]
Statement introduced before Junos OS Release 7.4.
For ATM interfaces, configure the virtual path (VP).
NOTE: Certain options apply only to specific platforms.
—ATM virtual path identifier. This is one of the VPIs that you define in the
vpi-identifier
statement. (For a list of hierarchy levels at which you can include the
see vci.)
Range: 0 through 255
The remaining statements are explained separately. See
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Maximum Number of ATM1 VCs on a VP
multipoint-destination
promiscuous-mode on page 1682
vci on page 1773
Chapter 41: Configuration Statements
vci statement,
.
CLI Explorer
vci
1777