Juniper ACX1000 Configuration Manual page 1435

Configuration
CLI Quick
Configuration
Configuring
Benchmarking Test
Parameters on Router
A
Configuring
Benchmarking Test
Parameters on Router
B
Copyright © 2017, Juniper Networks, Inc.
In this example, you configure the benchmarking test for the UNI direction of an Ethernet
pseudowire service that is enabled between two routers to detect and analyze the
performance of the interconnecting routers.
Configuring Benchmarking Test Parameters on Router A on page 1378
Configuring Benchmarking Test Parameters on Router B on page 1380
Results on page 1382
To quickly configure this example, copy the following commands, paste them in a text
file, remove any line breaks, change any details necessary to match your network
configuration, and then copy and paste the commands into the CLI at the [
level:
set interfaces ge-0/0/0 vlan-tagging
set interfaces ge-0/0/0 unit 0 vlan-id 101
set interfaces ge-0/0/0 unit 0 family inet address 200.0.0.1/24
set services rpm rfc2544-benchmarking profiles test-profile throughput test-type
throughput
set services rpm rfc2544-benchmarking profiles test-profile throughput packet-size 64
set services rpm rfc2544-benchmarking profiles test-profile throughput test-duration
20m
set services rpm rfc2544-benchmarking profiles test-profile throughput bandwidth-kbps
500
set services rpm rfc2544-benchmarking tests test-name test1 interface ge-0/0/0.1
set services rpm rfc2544-benchmarking tests test-name test1 test-profile throughput
set services rpm rfc2544-benchmarking tests test-name test1 mode initiate,terminate
set services rpm rfc2544-benchmarking tests test-name test1 family inet
set services rpm rfc2544-benchmarking tests test-name test1 dest-address 200.0.0.2
set services rpm rfc2544-benchmarking tests test-name test1 udp-port 4001
set interfaces ge-0/0/4 vlan-tagging
set interfaces ge-0/0/4 unit 0 encapsulation vlan-ccc
set interfaces ge-0/0/4 unit 0 vlan-id 101
set services rpm rfc2544-benchmarking tests test-name test1 interface ge-0/0/4.1
set services rpm rfc2544-benchmarking tests test-name test1 mode reflect
set services rpm rfc2544-benchmarking tests test-name test1 mode family ccc
set services rpm rfc2544-benchmarking tests test-name test1 direction uni
Chapter 37: Configuring RFC 2544-Based Benchmarking Tests
edit ] hierarchy
1377