Juniper ACX1000 Configuration Manual page 1887

Table 115: show bgp replication Output Fields
Field Name Field Description
Precision timer State of BGP precision timer feature in the kernel.
registration
State of the current internal BGP state replication session, Up or Down, and the duration for which
session state
the session has been in the indicated state.
Total number of flaps that occurred.
flaps
protocol state Current state of the protocol operation, Active, Connect, Idle, and the duration for which the protocol
has been in the indicated state.
Synchronization state at the time of executing the command. The states can be:
synchronization state
Total number of peers waiting for various messages:
number of peers waiting
Number of various types of messages that have been sent since internal replication session became
messages sent
active:
Total number of messages received:
messages received
Copyright © 2017, Juniper Networks, Inc.
Registered
—BGP registers with the precision-timer feature in the kernel for auto keepalive
generation after switchover.
NotRegistered
—Keepalive format of BGP is not registered.
Idle
Neighbor —Indicates that the neighbor state synchronization is in progress.
—Indicates that the request processing is over.
AckWait
—Indicates that the outbound routing filter synchronization is in progress.
ORF
—Indicates that the routing table synchronization is in progress.
RIB
Complete
—Number of peers waiting for a connection establishment or completed acknowledgment
AckWait
messages.
—Number of peers waiting for TCP socket-related operations.
SoWait
—Number of peers being synchronized.
Scheduled
Open —Number of Open messages sent.
—Number of connection establishment acknowledgment messages sent.
Establish
—Number of update messages sent.
Update
—Number of error messages sent.
Error
Complete —Number of connection complete acknowledgment messages sent.
—Number of Open messages received.
Open
—Number of request messages received:
Request
Wildcard —Number of requests received that used wildcards in the target address.
Targeted —Number of requests received that used a specific address.
—Number of connection establishment acknowledgement messages received.
EstablishAck
—Number of connection completed acknowledgement messages received.
CompleteAck
Chapter 42: Operational Commands
1829