Series Routers - Juniper ACX1000 Configuration Manual

Copyright © 2017, Juniper Networks, Inc.
maximum-sessions count;
maximum-sessions-per-connection count;
port udp-port-number;
server-inactivity-timeout minutes;
}
}
You can specify a number of TWAMP server properties, some of which are optional, by
including the server statement at the
[edit services rpm twamp]
server {
client-list list-name {
[ address address ];
}
authentication-mode mode;
maximum-connections count;
maximum-connections-per-client count;
maximum-sessions count;
maximum-sessions-per-connection count;
port udp-port-number;
}
To specify the list of allowed control client hosts that can connect to this server, include
the statement at the
client-list
value you include must be a Classless Interdomain Routing (CIDR) address (IP address
plus mask) that represents a network of allowed hosts. You can include multiple client
lists, each of which can contain a maximum of 64 entries. You must configure at least
one client address to enable TWAMP.
ACX Series routers do not support authentication and encryption modes. The value
for
authentication-mode
level must be set to
none
To specify the maximum number of concurrent connections the server can have to
client hosts, include the
hierarchy level. The allowed range of values is 1 through 2048 and the
twamp server]
default value is 64. You can also limit the number of connections the server can make
to a particular client host by including the
ACX Series routers supports a maximum of 15 concurrent connections.
To specify the maximum number of sessions the server can have running at one time,
include the
maximum-sessions
hierarchy level. The allowed range of values is 1 through 2048 and the default value is
64. You can also limit the number of sessions the server can have on a single connection
by including the maximum-sessions-per-connection
supports a maximum of 15 sessions.
To specify the TWAMP server listening port, include the
services rpm twamp server]
is not specified, then the default port 862 is used.
TWAMP control connection traffic always arrives on ACX routers with the listening
port set as 862. Because this port number for traffic probes can be modified, probes
that arrive with a different port number are not recognized and processed by ACX
Chapter 29: Understanding Network Management
[edit services rpm twamp]
[edit services rpm twamp server]
statement at the
[edit services rpm twamp server]
.
maximum-connections statement at the
maximum-connections-per-client
statement at the
[edit services rpm twamp server]
hierarchy level. The range is 1 through 65,535. If a port range
hierarchy level:
hierarchy level. Each
hierarchy
[edit services rpm
statement.
statement. ACX Series routers
statement at the
port [edit
965