Udp-Tcp-Port-Swap (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

udp-tcp-port-swap (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1766
Example: Configuring Tunnel Interfaces on a Gigabit Ethernet 40-Port DPC
Example: Configuring Tunnel Interfaces on a 10-Gigabit Ethernet 4-Port DPC
Example: Configuring Tunnel Interfaces on the MPC3E
bandwidth (Tunnel Services) on page 1449
udp-tcp-port-swap;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Statement introduced in Junos OS Release 14.2 for MX104 3D Universal Edge routers.
Swap source and destination UDP ports in the test packets. Only UDP port swap and
UDP over IPv4 traffic is supported.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
rfc2544-benchmarking on page 1698
RFC2544-Based Benchmarking Tests Overview
Configuring an RFC 2544-Based Benchmarking Test
test-name]
Copyright © 2017, Juniper Networks, Inc.