Juniper ACX1000 Configuration Manual page 958

ACX Series Universal Access Router Configuration Guide
Related
Documentation
900
user@host# set forwarding-class fc-1
Results
From configuration mode, confirm your configuration by entering the
the output does not display the intended configuration, repeat the configuration
instructions in this example to correct it.
In the following example, all packets coming into the router from the
interface are assigned to the
[edit class-of-service]
user@host# show
forwarding-classes {
class fc-1 queue-num 1;
}
interfaces {
at-0/0/16 {
unit 0 {
forwarding-class fc-1;
}
}
}
After you have completed the configuration, enter the
configuration mode.
Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
Configuring Fixed Classification on an ATM IMA Pseudowire on page 897
Example: Configuring Policing on an ATM IMA Pseudowire on page 915
Example: Configuring Shaping on an ATM IMA Pseudowire on page 902
forwarding class:
fc-1
commit
show command. If
at-0/0/16 unit 0
command from
Copyright © 2017, Juniper Networks, Inc.