ACX Series Universal Access Router Configuration Guide
switchover-mode
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1736
switchover-mode (non-revertive | revertive);
[edit chassis
synchronization
Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Specify whether the system should revert to a higher priority valid source.
The default is revertive mode.
—The system continues to use the current clock source as long as it is valid.
non-revertive
—The the system automatically switches from a lower to a higher quality clock
revertive
source whenever the higher clock source becomes available.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
quality-level on page 1687
show chassis synchronization on page 2386
]
Copyright © 2017, Juniper Networks, Inc.