Multipath (Routing Options) - Juniper ACX1000 Configuration Manual

multipath (Routing Options)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
multipath {
vpn-unequal-cost equal-external-internal;
as-path-compare;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name],
[edit routing-instances routing-instance-name routing-options],
[edit routing-instances routing-instance-name routing-options rib routing-table-name]
Statement introduced before Junos OS Release 7.4.
option added in Junos OS Release 8.4.
equal-external-internal
as-path-compare option introduced in Junos OS Release 10.1
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Statement introduced in Junos OS Release 11.3 for QFX Series switches.
Enable protocol-independent load balancing for Layer 3 VPNs. This allows the forwarding
next hops for both the active route and alternative paths to be used for load balancing.
For IPv6, you must configure the
routing-instance-name routing-options]
routing-instance-name routing-options rib routing-table-name]
Protocol-independent load balancing is applied to VPN routes that are equal up to their
router identifiers (
router-id
The options are explained separately.
NOTE: ACX Series routers do not support
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Protocol-Independent Load Balancing in Layer 3 VPNs on page 852
statement at both the
multipath
hierarchy level and the
) with regard to route selection.
Chapter 41: Configuration Statements
[edit routing-instances
[edit routing-instances
hierarchy level.
vpn-unequal-cost statement.
1631