Show Bgp Replication - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show bgp replication

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
1828
show bgp replication
Command introduced in Junos OS Release 8.5.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Support for
logical-system
Displays the status of BGP state replication between the master and backup Routing
Engines on devices that have nonstop active routing configured on them.
CAUTION: Before attempting nonstop active routing switchover, check the
output of
show bgp replication
synchronization has completed on the backup Routing Engine. The
status in the output of
replication has completed and the BGP synchronization is in progress.
To determine whether BGP synchronization is complete, you must check the
and
Protocol state
replication on the master Routing Engine. The
the
Synchronization state
before the BGP synchronization has completed, the BGP session might flap.
This command has no options.
view
show bgp replication logical-system
show bgp replication (for Master) on page 1830
show bgp replication (for Master) on page 1830
show bgp replication (for Backup) on page 1830
Table 115 on page 1829 lists the output fields for the
fields are listed in the approximate order in which they appear.
option introduced in Junos OS Release 13.3
to confirm that BGP routing table
show task replication
fields in the output of
Synchronization state
must be
complete
show bgp replication
complete
only indicates that the socket
show bgp
Protocol state must be idle
. If you perform NSR switchover
command. Output
Copyright © 2017, Juniper Networks, Inc.
and