Juniper ACX1000 Configuration Manual page 1863

Related
Documentation
List of Sample Output
Output Fields
Sample Output
request diagnostics tdr start interface ge-0/0/19
Copyright © 2017, Juniper Networks, Inc.
show diagnostics tdr
Diagnosing a Faulty Twisted-Pair Cable (CLI Procedure)
request diagnostics tdr start interface ge-0/0/19 on page 1805
Table 113 on page 1805 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 113: request diagnostics tdr Output Fields
Field Name Field Description
Information about the status of the TDR test request:
Test Status
user@host> request diagnostics tdr start interface ge-0/0/19
Interface TDR detail:
Test status
—The interface is administratively down.
Admin Down interface-name
The TDR test cannot run on interfaces that are administratively down.
Interface interface-name not found
Test successfully executed interface-name
started on the interface. You can view the test results with the
command.
diagnostics tdr
VCT not supported on interface-name
on the interface.
: Test successfully executed
Chapter 42: Operational Commands
command.
request diagnostics tdr
—The interface does not exist.
—The test has successfully
—The TDR test is not supported
ge-0/0/19
show
1805