Table of Contents
Advertisement
ERX 11.3.x Module Guide
FE-8 Module Combination (8 Ports) (256-MB Memory)
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
LEDs
Alarms, errors, and events
8
GE/FE
FE-8 I/O
8
First supported: 5.0.0
Final supported: Not applicable
The GE/FE line module must have a minimum of 256 MB of memory to be used
with JunosE Release 5.3.0 or a higher-numbered release.
130 W
Fast Ethernet
EFA ASIC
IEEE 802.3 standards compliance
10/100Base-T
See "Ethernet Modules" on page 87 for information about the layer 2 and layer
3 protocols and applications that this module combination supports.
ERX7xx models
ERX14xx models
ERX310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Not applicable
RJ-45 connectors
For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable.
For 100-Mbps operation, use only CAT 5 UTP cable.
The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up
to 100 m (328 feet).
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
See "Module LEDs" on page 109.
See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide,
Chapter 5, Configuring Ethernet Interfaces.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
