Clear Oam Ethernet Connectivity-Fault-Management Synthetic-Loss-Measurement - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

clear oam ethernet connectivity-fault-management synthetic-loss-measurement

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Sample Output
clear oam ethernet connectivity-fault-
management synthetic-loss-
measurement
1788
clear oam ethernet connectivity-fault-management synthetic-loss-measurement
maintenance-domain md-name
maintenance-association ma-name
<local-mep local-mep-id>
<remote-mep remote-mep-id>
Command introduced in Junos OS Release 13.2 for MX Series routers.
(MX Series routers)—For all routers that support IEEE 802.1ag OAM connectivity fault
management (CFM), clear the existing on-demand Ethernet synthetic loss measurement
(ETH-SLM) statistics and restart counting the ETH-SLM frame counts and statistics.
maintenance-domain md-name
maintenance-association ma-name
—(Optional) Clear connectivity fault management information
local-mep local-mep-id
for the specified local MEP only.
remote-mep remote-mep-id
for the specified remote MEP only.
view
monitor ethernet synthetic-loss-measurement on page 1796
show oam ethernet connectivity-fault-management synthetic-loss-statistics on
page 2807
clear oam ethernet connectivity-fault-management
synthetic-loss-measurement on page 1788
When you enter this command, you are provided feedback on the status of your request.
user@host> clear oam ethernet connectivity-fault-management synthetic-loss-measurement
maintenance-domain md5 maintenance-association ma5 local-mep 100 remote-mep 102
Synthetic loss measurement restarted.
—Name of an existing CFM maintenance domain.
—Name of an existing CFM maintenance association.
—(Optional) Clear connectivity fault management information
Copyright © 2017, Juniper Networks, Inc.