No-Local-Switching (Vpls) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

no-local-switching (VPLS)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1638
no-local-switching;
[edit bridge-domains bridge-domain-name]
Statement introduced in Junos OS Release 8.5.
Prevent CE devices from communicating directly with each other. If the
statement is configured, frames arriving on a CE interface are sent to a VPLS edge (VE)
device or core-facing interfaces only.
NOTE: (MX80, MX104, and the 16x10GE MPC, MPC1, or MPC2 on MX240,
MX480, MX960, MX2010, and MX2020 only) If you configure the
no-local-switching
hierarchy level, it might not prevent multicast traffic from being forwarded
between the CE-facing interfaces of the bridge domain. Broadcast, unknown
unicast, and known multicast traffic does not exhibit this behavior.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring VPLS and Integrated Routing and Bridging
command at the
[edit bridge-domains bridge-domain-name]
no-local-switching
Copyright © 2017, Juniper Networks, Inc.