Family (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

family (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1514
family (inet | ccc | bridge);
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
The option introduced in Junos OS Release 12.3X53 for ACX Series routers.
bridge
Configure the address type family for the benchmarking test.
inet —Indicates that the test is run on an IPv4 service.
NOTE: Family
ccc —Indicates that the test is run on a circuit cross-connect (CCC) or Ethernet pseudowire
service. The option specifies the direction (ingress or egress) to be used for
direction
the test.
—Indicates that the test is run on a Layer 2 Ethernet line (E- LINE) or an Ethernet
bridge
LAN (ELAN) service configured in a bridge domain.
NOTE: Junos OS Release 12.3X53 for ACX Series routers support only
family bridge
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
inet is not supported on ACX5048 and ACX5096 routers.
.
test-name]
Copyright © 2017, Juniper Networks, Inc.