Juniper ACX1000 Configuration Manual page 1871

Table 114: show bgp neighbor Output Fields (continued)
Field Name Field Description
Last error that occurred in the BGP session:
Last error
Export Name of the export policy that is configured on the peer.
Import Name of the import policy that is configured on the peer.
Options Configured BGP options:
Path attribute codes that are dropped from neighbor updates.
Path-attributes
dropped
Path attribute codes that are ignored during neighbor updates.
Path-attributes ignored
BGP neighbor does not support long-lived graceful restart (LLGR) restarter mode completely.
Peer does not support
LLGR Restarter or
Receiver functionality
Copyright © 2017, Juniper Networks, Inc.
—An error occurred, such as a version mismatch, that caused the session to close.
Cease
—In setting up the session, BGP received a message that it did not
Finite State Machine Error
understand.
—The session's hold time expired.
Hold Time Expired
Message Header Error —The header of a BGP message was malformed.
Open Message Error —A BGP open message contained an error.
—No errors occurred in the BGP session.
None
—A BGP update message contained an error.
Update Message Error
AddressFamily —Configured address family:
—Configured BGP static routes are advertised.
AdvertiseBGPStatic
—Authentication key change is enabled.
AutheKeyChain
—Certain path attributes are configured to be dropped from neighbor updates
DropPathAttributes
during inbound processing.
—Graceful restart is configured.
GracefulRestart
HoldTime —Hold time configured with the
interval at which keepalive messages are sent.
IgnorePathAttributes —Certain path attributes are configured to be ignored in neighbor updates
during inbound processing.
Local Address —Address configured with the
LLGR —BGP long-lived graceful restart capability is configured.
—BGP long-lived graceful restart is completely disabled for a neighbor.
LLGRHelperDisabled
—Allow BGP connections to external peers that are not on a directly connected network.
Multihop
—Configured MBGP state for the BGP group:
NLRI
nlri any .
Peer AS —Configured peer autonomous system (AS).
—Preference value configured with the
Preference
—Configured to refresh automatically when the policy changes.
Refresh
—Configured routing table group.
Rib-group
—Configured SAFI 129 according to RFC 6514 (BGP VPN multicast used
RFC6514CompliantSafi129
to use SAFI 128).
Chapter 42: Operational Commands
inet or inet-vpn .
hold-time statement. The hold time is three times the
local-address statement.
, , or both if you have configured
multicast unicast
statement.
preference
1813