Test-Iterator-Duration (Rfc 2544 Benchmarking); Test-Iterator-Pass-Threshold (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

test-iterator-duration (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

test-iterator-pass-threshold (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
test-iterator-duration seconds;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Specify the duration of each iteration in seconds. If you configure this value, the default
value of each iteration depends on the type of test being run. For throughput,
back-back-frames and frame-loss types of tests, the default value is 20 seconds. For
latency tests, the default value is 120 seconds.
seconds —Number of seconds for which each test iteration is run.
Range: 10 through 120 seconds
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
test-iterator-pass-threshold;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Specify the pass threshold of each iteration.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
Chapter 41: Configuration Statements
test-name]
test-name]
1745