Juniper ACX1000 Configuration Manual page 1924

ACX Series Universal Access Router Configuration Guide
Required Privilege
Level
Related
Documentation
List of Sample Output
1866
displayed on the craft interface on the TX Matrix router and its attached T640 routers.
On a TX Matrix Plus router, show messages that are currently displayed on the craft
interface on the TX Matrix Plus router and its attached routers.
all-members—(MX Series routers only) (Optional) Display information currently on the
craft interface for all members of the Virtual Chassis configuration.
lcc number—(TX Matrix, TX Matrix Plus routers only) (Optional) On a TX Matrix router,
show messages that are currently displayed on the craft interface for a specified
T640 router (line-card chassis) that is connected to the TX Matrix router. On a TX
Matrix Plus router, show messages that are currently displayed on the craft interface
for a specified router (line-card chassis) that is connected to the TX Matrix Plus
router.
Replace number with the following values depending on the LCC configuration:
0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display information currently on the craft
interface for the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display information currently
on the craft interface for the specified member of the Virtual Chassis configuration.
For an MX Series Virtual Chassis, replace member-id with a value of 0 or 1.
scc—(TX Matrix router only) (Optional) Show messages that are currently displayed on
the craft interface for the TX Matrix router (switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Show messages that are currently
displayed on the craft interface for the respective TX Matrix Plus router (switch-fabric
chassis). Replace number variable with
view
clear chassis display message
set chassis display message
show chassis craft-interface (M20 Router) on page 1868
show chassis craft-interface (M40 Router) on page 1869
.
0
Copyright © 2017, Juniper Networks, Inc.