Juniper ACX1000 Configuration Manual page 1036

ACX Series Universal Access Router Configuration Guide
Table 60: Standard MIBs supported by Junos OS (continued)
Standard MIB
RFC 3812, Multiprotocol Label Switching
(MPLS) Traffic Engineering (TE)
Management Information Base (MIB)
(read-only access)
RFC 3813, Multiprotocol Label Switching
(MPLS) Label Switching Router (LSR)
Management Information Base (MIB)
RFC 3826, The Advanced Encryption
Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model
RFC 3877, Alarm Management
Information Base
978
Exceptions
MPLS tunnels as interfaces are not
supported.
is supported on
mplsTunnelCHopTable
ingress routers only.
NOTE: The branch used by the
proprietary LDP MIB (
ldpmib.mib
conflicts with RFC 3812.
ldpmib.mib
been deprecated and replaced by
.
jnx-mpls-ldp.mib
Unsupported tables and objects:
mplsTunnelResourceMeanRate
TunnelResource table
mplsTunnelResourceMaxBurstSize
table
TunnelResource
mplsTunnelResourceMeanBurstSize
table
TunnelResource
mplsTunnelResourceExBurstSize
TunnelResource table
mplsTunnelResourceWeight
table
TunnelResource
mplsTunnelPerfTable
mplsTunnelCRLDPResTable
Unsupported tables and objects
(read-only access):
mplsInterfacePerfTable
mplsInSegmentPerfTable
mplsOutSegmentPerfTable
mplsInSegmentMapTable
mplsXCUp
mplsXCDown
No exceptions
Junos OS does not support the
alarmActiveStatsTable.
Traps that do not conform to the
alarm model are not supported.
However, these traps can be redefined
to conform to the alarm model.
Platforms
ACX Series, M Series, MX Series, PTX
Series, and T Series
)
has
in
in
in
in
in
ACX Series, M Series, MX Series, PTX
Series, SRX Series, and T Series
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
MX Series
Copyright © 2017, Juniper Networks, Inc.