Classifiers (Physical Interface); Clear - Juniper ACX1000 Configuration Manual

classifiers (Physical Interface)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

clear

Syntax
Hierarchy Level
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
classifiers {
type (classifier-name | default) ;
}
[edit class-of-service interfaces interface-name ]
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Apply a CoS aggregate behavior classifier to a physical interface. You can apply a default
classifier or one that is previously defined.
classifier-name —Name of the aggregate behavior classifier.
—Traffic type.
type
Values: , , and
dscp ieee-802.1
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
dscp on page 1496
inet-precedence on page 1563
ieee-802.1 on page 1554
request protection-group ethernet-ring clear group-name <name>
[edit protocols protection-group ethernet-ring]
Clears all the active manual command on the ring-node. In the case of non-revertive
mode of operation, this command can also be used on RPL-owner to force the reversion,
otherwise the ring will stay in Pending state. When a group-name is specified, clear
operation is done only for the specified group otherwise clear operation is done for all
the configured ring-instances on the device.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Ethernet Automatic Protection Switching Overview
inet-precedence
Chapter 41: Configuration Statements
1461