Juniper ACX1000 Configuration Manual page 1899

Sample Output
show bridge mac-table
show bridge mac-table (with Layer 2 Services over GRE Interfaces)
Copyright © 2017, Juniper Networks, Inc.
Table 117: show bridge mac-table Output Fields (continued)
Field Name Field Description
Layer 2 flags Debugging flags signifying that the MAC address is present in various lists.
Epoch Spanning Tree Protocol epoch number identifying when the MAC address
was learned. Used for debugging.
Sequence number Sequence number assigned to this MAC address. Used for debugging.
Learning mask Mask of the Packet Forwarding Engines where this MAC address was learned.
Used for debugging.
IPC generation Creation time of the logical interface when this MAC address was learned.
Used for debugging.
user@host> show bridge mac-table
MAC flags (S -static MAC, D -dynamic MAC, L -locally learned, C -Control MAC
SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC)
Routing instance : default-switch
Bridging domain : test1, VLAN : 1
MAC MAC
address flags
01:00:0c:cc:cc:cc S,NM
01:00:0c:cc:cc:cd S,NM
01:00:0c:cd:cd:d0 S,NM
64:87:88:6a:17:d0 D
64:87:88:6a:17:f0 D
user@host> show bridge mac-table
MAC flags (S -static MAC, D -dynamic MAC, L -locally learned
SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC)
Routing instance : default-switch
Bridging domain : vlan-1, VLAN : 1
MAC MAC
address flags
00:01:01:00:01:f7 D,SE
00:03:00:32:01:f7 D,SE
00:00:21:11:11:10 DL
00:00:21:11:11:11 DL
Routing instance : default-switch
Bridging domain : vlan-2, VLAN : 2
MAC MAC
address flags
00:02:01:33:01:f7 D,SE
Chapter 42: Operational Commands
Logical NH
interface Index
NULL
NULL
NULL
ae0.1
ae0.1
Logical
interface
gr-1/2/10.0
gr-1/2/10.0
ge-1/0/0.0
ge-1/1/0.0
Logical
interface
gr-1/2/10.1
RTR
ID
1841